Vulnerability Discussion

This requirement applies to wireless peripheral technologies (e.g., wireless mice, keyboards, displays, etc.) used with RHEL 10 systems. Wireless peripherals (e.g., Wi-Fi/Bluetooth/IR keyboards, mice and pointing devices, and near field communications [NFC]) present a unique challenge by creating an open, unsecured port on a computer.

Wireless peripherals must meet DOD requirements for wireless data transmission and be approved for use by the authorizing official. Even though some wireless peripherals, such as mice and pointing devices, do not ordinarily carry information that must be protected, modification of communications with these wireless peripherals may be used to compromise the RHEL 10 operating system.

Satisfies: SRG-OS-000299-GPOS-00117, SRG-OS-000300-GPOS-00118, SRG-OS-000424-GPOS-00188, SRG-OS-000481-GPOS-00481

Check

Note: This requirement is not applicable for systems that do not have physical wireless network radios.

Verify RHEL 10 disables wireless interfaces on the system with the following command:

$ nmcli device status
DEVICE TYPE STATE CONNECTION
virbr0 bridge connected virbr0
wlp7s0 wifi connected wifiSSID
enp6s0 ethernet disconnected --
p2p-dev-wlp7s0 wifi-p2p disconnected --
lo loopback unmanaged --
virbr0-nic tun unmanaged --

If a wireless interface is configured and has not been documented and approved by the information system security officer, this is a finding.

Fix

Configure RHEL 10 to disable all wireless network interfaces with the following command:

$ nmcli radio all off