Install DOD-approved ESS software and ensure it is operating continuously.

Windows 11 information systems must use BitLocker to encrypt all disks to protect the confidentiality and integrity of all information at rest.

Vulnerability Discussion

Check

Verify all Windows 11 information systems (including SIPRNet) employ BitLocker for full disk encryption.

For virtual desktop implementations (VDIs) in which the virtual desktop instance is deleted or refreshed upon logoff, this is NA.
For AVD implementations with no data at rest, this is NA.

If full disk encryption using BitLocker is not implemented, this is a finding.

Verify BitLocker is turned on for the operating system drive and any fixed data drives.

Open "BitLocker Drive Encryption" from the Control Panel.

If the operating system drive or any fixed data drives have "Turn on BitLocker", this is a finding.

Note: An alternate encryption application may be used in lieu of BitLocker providing it is configured for full disk encryption and satisfies the pre-boot authentication requirements (WN11-00-000031 and WN11-00-000032).

Fix

Enable full disk encryption on all information systems (including SIPRNet) using BitLocker.

BitLocker, included in Windows, can be enabled in the Control Panel under "BitLocker Drive Encryption" as well as other management tools.

Note: An alternate encryption application may be used in lieu of BitLocker providing it is configured for full disk encryption and satisfies the pre-boot authentication requirements (WN11-00-000031 and WN11-00-000032).

Windows 11 systems must use a BitLocker PIN for pre-boot authentication.

Vulnerability Discussion

If data at rest is unencrypted, it is vulnerable to disclosure. Even if the operating system enforces permissions on data access, an adversary can remove non-volatile memory and read it directly, thereby circumventing operating system controls. Encrypting the data ensures that confidentiality is protected even when the operating system is not running. Pre-boot authentication prevents unauthorized users from accessing encrypted drives.

Uninstall "TFTP Client" from the system.

Run "Programs and Features".
Select "Turn Windows Features on or off".
De-select "TFTP Client".

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy >> "Account lockout threshold" to "3" or less invalid logon attempts (excluding "0" which is unacceptable).

The period of time before the bad logon counter is reset must be configured to 15 minutes.

Vulnerability Discussion

The account lockout feature, when enabled, prevents brute-force password attacks on the system. This parameter specifies the period of time that must pass after failed logon attempts before the counter is reset to 0. The smaller this value is, the less effective the account lockout feature will be in protecting the local system.

Check

Verify the effective setting in Local Group Policy Editor.
Run "gpedit.msc".

Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy.

If the "Reset account lockout counter after" value is less than "15" minutes, this is a finding.

Fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy >> "Reset account lockout counter after" to "15" minutes.

The password history must be configured to 24 passwords remembered.

Vulnerability Discussion

A system is more vulnerable to unauthorized access when system users recycle the same password several times without being required to change a password to a unique password on a regularly scheduled basis. This enables users to effectively negate the purpose of mandating periodic password changes. The default value is 24 for Windows domain systems. DOD has decided this is the appropriate value for all Windows systems.

Check

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy >> "Minimum Password Age" to at least "1" day.

Passwords must, at a minimum, be 14 characters.

Vulnerability Discussion

Information systems not protected with strong password schemes (including passwords of minimum length) provide the opportunity for anyone to crack the password, thus gaining access to the system and compromising the device, information, or the local network.

Check

The system must be configured to audit Account Logon - Credential Validation successes.

Vulnerability Discussion

Check

Fix

The system must be configured to audit Account Management - Security Group Management successes.

Vulnerability Discussion

Check

Fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Management >> "Audit Security Group Management" with "Success" selected.

The system must be configured to audit Account Management - User Account Management failures.

Vulnerability Discussion

Check

Fix

The system must be configured to audit Account Management - User Account Management successes.

Vulnerability Discussion

Check

Fix

The system must be configured to audit Detailed Tracking - PNP Activity successes.

Vulnerability Discussion

Check

Fix

Computer Configuration >> Windows Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Detailed Tracking >> "Audit PNP Activity" with "Success" selected.

The system must be configured to audit Detailed Tracking - Process Creation successes.

Vulnerability Discussion

Check

Fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Detailed Tracking >> "Audit Process Creation" with "Success" selected.

The system must be configured to audit Logon/Logoff - Account Lockout failures.

Vulnerability Discussion

Check

Fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> "Audit Account Lockout" with "Failure" selected.

The system must be configured to audit Logon/Logoff - Group Membership successes.

Vulnerability Discussion

Check

Fix

Configure the policy value for Computer Configuration >> Windows Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> "Audit Group Membership" with "Success" selected.

The system must be configured to audit Logon/Logoff - Logoff successes.

Vulnerability Discussion

Check

Fix

The system must be configured to audit Logon/Logoff - Logon failures.

Vulnerability Discussion

Check

Fix

The system must be configured to audit Logon/Logoff - Logon successes.

Vulnerability Discussion

Check

Fix

The system must be configured to audit Logon/Logoff - Special Logon successes.

Vulnerability Discussion

Check

Fix

Windows 11 must be configured to audit Object Access - File Share failures.

Vulnerability Discussion

Check

Fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Object Access >> "Audit File Share" with "Failure" selected.

Windows 11 must be configured to audit Object Access - File Share successes.

Vulnerability Discussion

Check

Fix

Windows 11 must be configured to audit Object Access - Other Object Access Events successes.

Vulnerability Discussion

Check

Fix

Windows 11 must be configured to audit Object Access - Other Object Access Events failures.

Vulnerability Discussion

Check

Fix

The system must be configured to audit Object Access - Removable Storage failures.

Vulnerability Discussion

Check

Security Option "Audit: Force audit policy subcategory settings to override audit policy category settings" must be set to "Enabled" (WN11-SO-000030) for the detailed auditing subcategories to be effective.

Use the AuditPol tool to review the current Audit Policy configuration:
Open a Command Prompt with elevated privileges ("Run as Administrator").
Enter "AuditPol /get /category:*"

Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding:

Object Access >> Removable Storage - Failure

Some virtual machines may generate excessive audit events for access to the virtual hard disk itself when this setting is enabled. This may be set to Not Configured in such cases and would not be a finding. This must be documented with the ISSO to include mitigations such as monitoring or restricting any actual removable storage connected to the VM.

Fix

The system must be configured to audit Object Access - Removable Storage successes.

Vulnerability Discussion

Check

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN11-SO-000030) for the detailed auditing subcategories to be effective.

Use the AuditPol tool to review the current Audit Policy configuration:
Open a Command Prompt with elevated privileges ("Run as Administrator").
Enter "AuditPol /get /category:*"

Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding:

Object Access >> Removable Storage - Success

Some virtual machines may generate excessive audit events for access to the virtual hard disk itself when this setting is enabled. This may be set to Not Configured in such cases and would not be a finding. This must be documented with the ISSO to include mitigations such as monitoring or restricting any actual removable storage connected to the VM.

Fix

The system must be configured to audit Policy Change - Audit Policy Change successes.

Vulnerability Discussion

Check

Fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Policy Change >> "Audit Policy Change" with "Success" selected.

The system must be configured to audit Policy Change - Authentication Policy Change successes.

Vulnerability Discussion

Check

Fix

The system must be configured to audit Policy Change - Authorization Policy Change successes.

Vulnerability Discussion

Check

Fix

The system must be configured to audit Privilege Use - Sensitive Privilege Use failures.

Vulnerability Discussion

Check

Fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Privilege Use >> "Audit Sensitive Privilege Use" with "Failure" selected.

The system must be configured to audit Privilege Use - Sensitive Privilege Use successes.

Vulnerability Discussion

Check

Fix

The system must be configured to audit System - IPsec Driver failures.

Vulnerability Discussion

Check

Fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> "Audit IPsec Driver" with "Failure" selected.

The system must be configured to audit System - Other System Events successes.

Vulnerability Discussion

Check

Fix

The system must be configured to audit System - Other System Events failures.

Vulnerability Discussion

Check

Fix

The system must be configured to audit System - Security State Change successes.

Vulnerability Discussion

Check

Fix

The system must be configured to audit System - Security System Extension successes.

Vulnerability Discussion

Check

Fix

The system must be configured to audit System - System Integrity failures.

Vulnerability Discussion

Check

Fix

The system must be configured to audit System - System Integrity successes.

Vulnerability Discussion

Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior.

Audit Other Logon/Logoff Events determines whether Windows generates audit events for other logon or logoff events. Logon events are essential to understanding user activity and detecting potential attacks.

Check

Check

Ensure Audit Process Creation auditing has been enabled:

Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policy >> Detailed Tracking >> Audit Process Creation.

If "Audit Process Creation" is not set to "Failure", this is a finding.

Fix

Go to Computer Configuration >> Windows Settings >>Security Settings>> Advanced Audit Policy Configuration >> System Audit Policies >> Detailed Tracking >> Set "Audit Process Creation" to "Failure".

Camera access from the lock screen must be disabled.

Vulnerability Discussion

Enabling camera access from the lock screen could allow for unauthorized use. Requiring logon will ensure the device is only used by authorized personnel.

Check

Fix

Configure the policy value for Computer Configuration >> Administrative Templates >> MS Security Guide >> "Apply UAC restrictions to local accounts on network logons" to "Enabled".

This policy setting requires the installation of the SecGuide custom templates included with the STIG package. "SecGuide.admx" and "SecGuide.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively.

WDigest Authentication must be disabled.

Vulnerability Discussion

When the WDigest Authentication protocol is enabled, plain text passwords are stored in the Local Security Authority Subsystem Service (LSASS) exposing them to theft. WDigest is disabled by default in Windows 11. This setting ensures this is enforced.

Check

Fix

Configure the policy value for Computer Configuration >> Administrative Templates >> MS Security Guide >> "WDigest Authentication (disabling may require KB2871997)" to "Disabled".

The patch referenced in the policy title is not required for Windows 11.

This policy setting requires the installation of the SecGuide custom templates included with the STIG package. "SecGuide.admx" and "SecGuide.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively.

Run as different user must be removed from context menus.

Vulnerability Discussion

The "Run as different user" selection from context menus allows the use of credentials other than the currently logged on user. Using privileged credentials in a standard user session can expose those credentials to theft. Removing this option from context menus helps prevent this from occurring.

Check

Check

This requirement is applicable to domain-joined systems, for standalone systems this is NA.

If the following registry values do not exist or are not configured as specified, this is a finding.

Registry Hive: HKEY_LOCAL_MACHINE
Registry Path: \SOFTWARE\Policies\Microsoft\Windows\NetworkProvider\HardenedPaths\

Value Name: \\*\NETLOGON
Value Type: REG_SZ
Value: RequireMutualAuthentication=1, RequireIntegrity=1

Value Name: \\*\SYSVOL
Value Type: REG_SZ
Value: RequireMutualAuthentication=1, RequireIntegrity=1

Additional entries would not be a finding.

Fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Network >> Network Provider >> "Hardened UNC Paths" to "Enabled" with at least the following configured in "Hardened UNC Paths:" (click the "Show" button to display).

Value Name: \\*\SYSVOL
Value: RequireMutualAuthentication=1, RequireIntegrity=1

Value Name: \\*\NETLOGON
Value: RequireMutualAuthentication=1, RequireIntegrity=1

Windows 11 must be configured to prioritize ECC Curves with longer key lengths first.

Vulnerability Discussion

Use of weak or untested encryption algorithms undermines the purposes of utilizing encryption to protect data. By default Windows uses ECC curves with shorter key lengths first. Requiring ECC curves with longer key lengths to be prioritized first helps ensure more secure algorithms are used.

Check

Fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Network >> SSL Configuration Settings >> "ECC Curve Order" to "Enabled" with "ECC Curve Order:" including the following in the order listed:

NistP384
NistP256

Simultaneous connections to the internet or a Windows domain must be limited.

Vulnerability Discussion

Multiple network connections can provide additional attack vectors to a system and must be limited. The "Minimize the number of simultaneous connections to the Internet or a Windows Domain" setting prevents systems from automatically establishing multiple connections. When both wired and wireless connections are available, for example, the less preferred connection (typically wireless) will be disconnected.

Check

The default behavior for "Minimize the number of simultaneous connections to the Internet or a Windows Domain" is "Enabled".

If it exists and is configured with a value of "0", this is a finding.

Registry Hive: HKEY_LOCAL_MACHINE
Registry Path: \SOFTWARE\Policies\Microsoft\Windows\WcmSvc\GroupPolicy\

Value Name: fMinimizeConnections

Value Type: REG_DWORD
Value: 3 (or if the Value Name does not exist)

Fix

The default behavior for "Minimize the number of simultaneous connections to the Internet or a Windows Domain" is "Enabled".

If this needs to be corrected, configure the policy value for Computer Configuration >> Administrative Templates >> Network >> Windows Connection Manager >> "Minimize the number of simultaneous connections to the Internet or a Windows Domain" to "Enabled". Under "Options", set "Minimize Policy Options" to "3 = Prevent Wi-Fi When on Ethernet".

Connections to non-domain networks when connected to a domain authenticated network must be blocked.

Vulnerability Discussion

Multiple network connections can provide additional attack vectors to a system and must be limited. When connected to a domain, communication must go through the domain connection.

Check

Fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Network >> Windows Connection Manager >> "Prohibit connection to non-domain networks when connected to domain authenticated network" to "Enabled".

Windows 11 systems must use either Group Policy or an approved Mobile Device Management (MDM) product to enforce STIG compliance.

Vulnerability Discussion

Without Windows 11 systems being managed, devices could be rogue and become targets of an attacker.

Check

Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Audit Process Creation >> "Include command line in process creation events" to "Enabled".

Windows 11 must be configured to enable Remote host allows delegation of non-exportable credentials.

Vulnerability Discussion

An exportable version of credentials is provided to remote hosts when using credential delegation which exposes them to theft on the remote host. Restricted Admin mode or Remote Credential Guard allow delegation of non-exportable credentials providing additional protection of the credentials. Enabling this configures the host to support Restricted Admin mode or Remote Credential Guard.

Systems must at least attempt device authentication using certificates.

Vulnerability Discussion

Using certificates to authenticate devices to the domain provides increased security over passwords. By default systems will attempt to authenticate using certificates and fall back to passwords if the domain controller does not support certificates for devices. This may also be configured to always use certificates for device authentication.

Check

This requirement is applicable to domain-joined systems, for standalone systems this is NA.

The default behavior for "Support device authentication using certificate" is "Automatic".

If it exists and is configured with a value of "0", this is a finding.

Registry Hive: HKEY_LOCAL_MACHINE
Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\Kerberos\Parameters\

Value Name: DevicePKInitEnabled
Value Type: REG_DWORD
Value: 1 (or if the Value Name does not exist)

Fix

This requirement is applicable to domain-joined systems, for standalone systems this is NA.

The default behavior for "Support device authentication using certificate" is "Automatic".

To correct this, configured the policy value for Computer Configuration >> Administrative Templates >> System >> Kerberos >> "Support device authentication using certificate" to "Not Configured or "Enabled" with either option selected in "Device authentication behavior using certificate:".

The network selection user interface (UI) must not be displayed on the logon screen.

Vulnerability Discussion

Enabling interaction with the network selection UI allows users to change connections to available networks without signing into Windows.

Check

Fix

Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Logon >> "Do not display network selection UI" to "Enabled".

Local users on domain-joined computers must not be enumerated.

Vulnerability Discussion

The username is one part of logon credentials that could be used to gain access to a system. Preventing the enumeration of users limits this information to authorized personnel.

Check

This requirement is applicable to domain-joined systems, for standalone systems this is NA.

If the following registry value does not exist or is not configured as specified, this is a finding:

Registry Hive: HKEY_LOCAL_MACHINE
Registry Path: \SOFTWARE\Policies\Microsoft\Windows\System\

Value Name: EnumerateLocalUsers

Value Type: REG_DWORD
Value: 0

Fix

This requirement is applicable to domain-joined systems, for standalone systems this is NA.

Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Logon >> "Enumerate local users on domain-joined computers" to "Disabled".

Users must be prompted for a password on resume from sleep (on battery).

Vulnerability Discussion

Authentication must always be required when accessing a system. This setting ensures the user is prompted for a password on resume from sleep (on battery).

Check

Fix

Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Power Management >> Sleep Settings >> "Require a password when a computer wakes (on battery)" to "Enabled".

The user must be prompted for a password on resume from sleep (plugged in).

Vulnerability Discussion

Authentication must always be required when accessing a system. This setting ensures the user is prompted for a password on resume from sleep (plugged in).

Check

Fix

Autoplay must be disabled for all drives.

Vulnerability Discussion

Allowing autoplay to execute may introduce malicious code to a system. Autoplay begins reading from a drive as soon as media is inserted in the drive. As a result, the setup file of programs or music on audio media may start. By default, autoplay is disabled on removable drives, such as the floppy disk drive (but not the CD-ROM drive) and on network drives. If this policy is enabled, autoplay can be disabled on all drives.

Check

If the following registry value does not exist or is not configured as specified, this is a finding:

Registry Hive: HKEY_LOCAL_MACHINE
Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\policies\Explorer\

Value Name: NoDriveTypeAutoRun

Value Type: REG_DWORD
Value: 0x000000ff (255)

Note: If the value for NoDriveTypeAutorun is entered manually, it must be entered as "ff" when Hexadecimal is selected, or "255" with Decimal selected. Using the policy value specified in the Fix section will enter it correctly.

Fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> AutoPlay Policies >> "Turn off AutoPlay" to "Enabled:All Drives".

Enhanced anti-spoofing for facial recognition must be enabled on Windows 11.

Vulnerability Discussion

Enhanced anti-spoofing provides additional protections when using facial recognition with devices that support it.

Remote Desktop Services must be configured with the client connection encryption set to the required level.

Vulnerability Discussion

Remote connections must be encrypted to prevent interception of data or sensitive information. Selecting "High Level" will ensure encryption of Remote Desktop Services sessions in both directions.

Check

Fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Remote Desktop Services >> Remote Desktop Session Host >> Security >> "Set client connection encryption level" to "Enabled" and "High Level".

Attachments must be prevented from being downloaded from RSS feeds.

Vulnerability Discussion

Attachments from RSS feeds may not be secure. This setting will prevent attachments from being downloaded from RSS feeds.

Check

Fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> RSS Feeds >> "Prevent downloading of enclosures" to "Enabled".

Basic authentication for RSS feeds over HTTP must not be used.

Vulnerability Discussion

Basic authentication uses plain text passwords that could be used to compromise a system.

Check

Check

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Accounts: Guest account status" to "Disabled".

Local accounts with blank passwords must be restricted to prevent access from the network.

Vulnerability Discussion

An account without a password can allow unauthorized access to a system as only the username would be required. Password policies must prevent accounts with blank passwords from existing on a system. However, if a local account with a blank password did exist, enabling this setting will prevent network access, limiting the account to local console logon only.

Check

Fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Accounts: Limit local account use of blank passwords to console logon only" to "Enabled".

The built-in administrator account must be renamed.

Vulnerability Discussion

The built-in administrator account is a well-known account subject to attack. Renaming this account to an unidentified name improves the protection of this account and the system.

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Interactive logon: Message title for users attempting to log on" to "DoD Notice and Consent Banner", "US Department of Defense Warning Statement", or a site-defined equivalent.

If a site-defined title is used, it can in no case contravene or modify the language of the banner text required in WN11-SO-000075.

Caching of logon credentials must be limited.

Vulnerability Discussion

The default Windows configuration caches the last logon credentials for users who log on interactively to a system. This feature is provided for system availability reasons, such as the user's machine being disconnected from the network or domain controllers being unavailable. Even though the credential cache is well-protected, if a system is attacked, an unauthorized individual may isolate the password to a domain user account using a password-cracking program and gain access to the domain.

Check

Fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Network access: Allow anonymous SID/Name translation" to "Disabled".

Anonymous enumeration of SAM accounts must not be allowed.

Vulnerability Discussion

Anonymous enumeration of SAM accounts allows anonymous log on users (null session connections) to list all accounts names, thus providing a list of potential points to attack the system.

Check

Fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Network access: Do not allow anonymous enumeration of SAM accounts" to "Enabled".

Anonymous enumeration of shares must be restricted.

Vulnerability Discussion

Allowing anonymous logon users (null session connections) to list all account names and enumerate all shared resources can provide a map of potential points to attack the system.

Check

Fix

Kerberos encryption types must be configured to prevent the use of DES and RC4 encryption suites.

Vulnerability Discussion

Certain encryption types are no longer considered secure. This setting configures a minimum encryption type for Kerberos, preventing the use of the DES and RC4 encryption suites.

Check

Check

Check

Fix

Change the enabled local Administrator account password at least every 60 days.

Windows LAPS must be used to change the built-in Administrator account password. Domain-joined and nondomain-joined systems can configure this to occur more frequently. LAPS will change the password every 30 days by default.

More information is available at:
https://techcommunity.microsoft.com/t5/windows-it-pro-blog/by-popular-demand-windows-laps-available-now/ba-p/3788747
https://learn.microsoft.com/en-us/windows-server/identity/laps/laps-overview#windows-laps-supported-platforms-and-azure-ad-laps-preview-status

Toast notifications to the lock screen must be turned off.

Vulnerability Discussion

Toast notifications that are displayed on the lock screen could display sensitive information to unauthorized personnel. Turning off this feature will limit access to the information to a logged on user.

Check

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Access Credential Manager as a trusted caller" to be defined but containing no entries (blank).

The "Access this computer from the network" user right must only be assigned to the Administrators and Remote Desktop Users groups.

Vulnerability Discussion

Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities.

Accounts with the "Access this computer from the network" user right may access resources on the system, and must be limited to those that require it.

Check

Fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Deny access to this computer from the network" to include the following:

Domain Systems Only:
Enterprise Admins group
Domain Admins group
Local account (see Note below)

All Systems:
Guests group

Privileged Access Workstations (PAWs) dedicated to the management of Active Directory are exempt from denying the Enterprise Admins and Domain Admins groups. (See the Windows Privileged Access Workstation STIG for PAW requirements.)

Note: "Local account" is a built-in security group used to assign user rights and permissions to all local accounts.

The "Deny log on as a batch job" user right on domain-joined workstations must be configured to prevent access from highly privileged domain accounts.

Vulnerability Discussion

Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities.

The "Deny log on as a batch job" right defines accounts that are prevented from logging on to the system as a batch job, such as Task Scheduler.

In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower trust systems helps mitigate the risk of privilege escalation from credential theft attacks which could lead to the compromise of an entire domain.

Check

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Deny log on locally" to include the following:

Domain Systems Only:
Enterprise Admins Group
Domain Admins Group

Privileged Access Workstations (PAWs) dedicated to the management of Active Directory are exempt from denying the Enterprise Admins and Domain Admins groups. (See the Windows Privileged Access Workstation STIG for PAW requirements.)

All Systems:
Guests Group

The "Deny log on through Remote Desktop Services" user right on Windows 11 workstations must be configured to prevent access from highly privileged domain accounts and local accounts on domain systems and unauthenticated access on all systems.

Vulnerability Discussion

Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities.

The "Deny log on through Remote Desktop Services" right defines the accounts that are prevented from logging on using Remote Desktop Services.

If Remote Desktop Services is not used by the organization, the Everyone group must be assigned this right to prevent all access.

In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower trust systems helps mitigate the risk of privilege escalation from credential theft attacks, which could lead to the compromise of an entire domain.

Local accounts on domain-joined systems must also be assigned this right to decrease the risk of lateral movement resulting from credential theft attacks.

The Guests group must be assigned this right to prevent unauthenticated access.

Check

Check

Check

Fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Take ownership of files or other objects" to only include the following groups or accounts:

Administrators